STRUCTURAL FEATURES

Structure and Panel: Harsh environment resistant furnace powder painted galvanized sheet with 19 mm thick isolation for thermal leak reduction and soundproofing.
Filter: High air quality thanks to ISO Coarse≥40% (G2) up to ISO ePM1≥80% (F9).
Refrigerant Control: Electronic expansion valve as a standard in units with reversible cooling system.
Compressor: Scroll compressors featuring Intermediate Discharge Valve (IDV) technology with uneven tandem or trio connection.
Heating: Heat pump/ Gas burner/ Hot water/ Electrical heating.
Heating/Cooling Coil: Copper pipe aluminum fins with various coating options
Fan: Highly efficient EC plug fans with aerodynamic backward curved blades in order to guarantee low sound level. Airfoil, Sickle-shaped Aluminum blades with serrated trailing edge powered by thermally protected TEAO motors.
Pressure: Medium/ High Pressure Gauge
Energy Saving: Free-Cooling option (Thermic/ Enthalpy Free-Cooling)
Power Supply and Control: Plug-and-play unit due to factory fitted controller
Monitor/ Management: BMS management as a standard that can communicate with Modbus RTU or Modbus TCP/IP protocol.

OPTIONS

• Safety relief valve.
• Indoor and outdoor coil/fin coating options.
• Low/medium/high capacity electrical heater.
• Electrical pre-heater.
• Hot water coil.
• Proportional heating control with 2/3-way valve set.
• Outdoor coil protection grill.
• Room display unit.
• Room temperature/humidity/air quality sensor options.
• duct type air quality sensor.
• Pre filter/filter clogging alarm.
• First and second stage panel filter options.
• Smoke detector.
• Fire alarm digital input.
• Supply or exhaust fan constant airflow
• Manuel or proportıonal control fresh air damper.
• Free cooling by enthalpy control.
• IP55 electrical panel.
• Dehumidification control feature.
• Supply air temperature control.
• 4.3”/ 7” touchscreen hmi control panel.
• Proportionally controlled return air by-pass damper at hru.
• Filter options for the heat recovery unit.
• Fresh air on/off damper(hru).
• Electronic expansion valve (only cooling).
• Full fresh application.
• Compressor soft starter.

MODULAR OPTIONS
• Plate heat recovery unit module.
• Bag filter module.
• Low/High capacity direct fired gas burner module.
• Exhaust EC plug fan module.