STRUCTURAL FEATURES

Compressor: High efficiency, oil-free Turbocor compressor with magnetic bearing. Together with built-in protection and inlet and outlet line cut-off valves.
Evaporator: Close cell and flooded shell & tube evaporator with polyurethane insulation. Together with differential pressure switch and built-in Victaulic connections.
Condenser: Micro channels.
Fan: Axial fan with built-in thermal protection, protection grill and proportional speed control. Fan with EC motor for T and Q versions.
Control: Electronic control with microprocessor.
Structure: Powder polyester painted galvanized steel structure.

STANDARD FEATURES

• High and low pressure gauge.
• Electronic expansion valve.
• Double safety valve.
• Time-card.
• Master/slave control up to parallel 4 units.

VERSIONS

B - Standard version, compressor with acoustical insulation , only cooling (TCATBZ).
T – High efficiency and silenced version, only cooling (TCATTZ).
Q - Super silenced version, only cooling (TCATQZ).

FACTORY FITTED ACCESSORIES

• Single or double pump. 1 main and 1 backup applications in double pump options.
• Standard and high pressure versions of pumps are optional.
• Condensation control through over pressure fans.
• Pump control with variable flow (VPF: Variable Primary Flow).
• FI-15 kit: operation at -15 C outdoor air temperature (Condensation control) (through fans with EC motor).
• Power factor correction capacitors (Cosf > 0.94).
• Compressor circuit disconnecting switch.
• Electromechanical flow switch.
• Forced power consumption limit.
• Forced noise limit.
• Energy parameters measurement device.
• Compressor acoustical insulation.
• Refrigerant leakage detector.
• High and low pressure gauges for the refrigerant circuit.
• Coil protection grills.
• Epoxy coated condenser with micro channels.
• Minimum/maximum power supply control.
• Digital input for double set point.
• Set point shift (4-20 mA analogue signal).
• Evaporator anti-freezing heater, electrical panel and electric pumps if applicable.
• Interfaces for serial communication with other devices.
• Anti-vibration mouths.

SEPARATELY SUPPLIED ACCESSORIES

• Remote controller with display.
• Control devices for monitoring and remote management of the device.
• Sequencer for integrated management of multiple chillers.