HIzlı Menü


Z-Power SE Series 710-1750 kW

Explore and Enjoy Efficiency and Compactness
Air Cooled Chillers with Axial Fan
Semi Hermetic Screw Compressors
Eco Friendly R134a Refrigerant Gas


High Energy Efficiency Units
High Energy Efficiency and Comfort in All Seasons
Wide and Smart Options
Integrated Linear Capacity Control
Special Energy Efficient Solutions for Commercial Building


Quick info


Technical Features
Let's Call You


Compressor: Semi hermetic screw compression compressor which has the features of high energy efficiency and star delta limited start and which is equipped with thermal protection, crankcase heater and refrigerant pipe shut-off valve .
Electronic Expansion Valve: It is standard for all models.
Water Side Heat Exchangers: Closed cell shell and tube evaporator which provides dry expansion and which is equipped with polyurethane foam insulation, water flow differential pressure switch and victaulic connections.
Air Side Heat Exchanger: Finned coil developed with copper pipes and aluminium fins.
Fan: Electrical axial fans with external rotor, equipped with built-in thermal protection, protection grill and proportional electronic device for constant regulation of fan rotational speed.
Control: Electronic control with microprocessor.
Structure: Made of galvanized steel sheet, painted with polyester powders.

Moreover, the following features are added to the unit:
• High/low pressure gauge, belonging to refrigerant circuit.
• Clock board that displays the date and time and machine time band management.


B-Standard version (TCAVBZ).
S-Silenced version (TCAVSZ) which is equipped with low speed fans and soundproof compressor cover.
I-Soundproofed version (TCAVIZ) which is equipped with soundproof compressor cover.


• Superheated steam cooler.
• Full (100%) heat recovery.
• Heat recovery unit/ Thermostat with superheated steam cooler.
• -10°C Condensation control (standard for S version).
• -15°C Condensation control, where fans with EC motor are located.
• Power factor correction capacitors (cosφ > 0.94).
• Thermal overload valves for compressor and fan.
• Forced power usage limit.
• Compressor inlet shut-off valves.
• Low and high pressure gauges for each refrigerant circuit.
• Lower compartment protecting grills.
• Coil protection grills.
• Compressor control with linear capacity (25%-100%).
• Evaporator anti-freezing heater and heat exchangers  if applicable.
• Digital input for double set point.
• Compressor oil level sensor.
• Control of Minimum/Maximum power back-up voltage.
• 4-20mA analogue input for variable set point.
• Copper / Pre-Painted aluminium or copper/copper coils.
• Interfaces for serial communication with other devices.
• Spring anti-vibration supports.


• Remote keyboard with display.
• Üntes Supervisors for unit monitoring and remote management.
• Üntes Sequencer for integrated management of multiple chillers.